Q: One visitor asked, "I am having a wall and doorway separating two rooms with hardwood floors removed . Since the boards run perpendicular to the wall being torn down, I will not be able to blend the boards together. Is there some kind of transition board, maybe 8 inches wide, that I can purchase to fill the gap in the floor that removing the wall will leave? Will that look good or is there a better way to join the two floors?"
If the flooring on each side of the wall lines up, you can stagger in both
sides. Or you can cut one side straight and stagger the other side.
Another option is to cut an opening, say 8" or whatever it may be across the
entire room and run the flooring in the patch in the opposite direction to
the existing floor.
As long as the boards are not the old 2" wide type, you have options.
Related questions about wood floor repairs:
Cracks, Dents and Scratches
>Filler for repairing gaps?
>Can we use urethane to fill gaps between planks?
>Do you think that 1/16" is a large gap?
>How do we fix a dent?
>How to touch up indentations from dog's claws (on maple floor)?
>Should I fill in deep gouges?
>How to fix a piano made gouge?
>How do we blend in nail heads that are sticking out?
>What can we do about these 1/2" gaps?
>How do I remove staples from the floor?
>How do we remove scuff marks from our floor?
>What are signs of termite damage on my hardwood floors?
>I have deep gouges in my stair treads and risers. I used a putty filler and then stained some of the stairs only to discover they are still quite visible. Is there anything to do to make these marks blend in with the rest of wood?
>How can I remove the cigarette burn mark on my wood floor?
>There is some termite damage in almost all the boards of our new homes floor. I want to know if I could use wood filler over these spots or maybe even the sawdust and glue.
>Our problem is that the flooring seems to have lots of cracks between the boards and somebody in the past put a lot of NAILS in the boards in the hallway. Can we putty this or is there a better way to repair it?
>No gaps have developed anywhere on our floors, save an 8ft run betweentwo planks in the kitchen. the gap is 1/8th of an inch (A nickel fits inside of it). How can we repair this and still have the floor look great?
>If space between planks is wide can these gaps be filled without ruining the "look"?
>How do I silence the squeaking of our hardwood stairs?
>How do we stop our floors from "popping"?
>Something heavy was dragged across floor and left a mark. How do we fix this?
>How can we fill the 1" cracks between the boards of our floors?
>Does a 3/16 variance over 10 ft. span for 3/4 thick cause creaks?
>How do I remove the staples in my floor and what do I fill the holes with?
>Our floor is making some creaking noises in some areas. How can wefix this?
Cupping and Leveling (& Blending 2 surfaces together)
>Our floor was put down in the summer and this winter it buckled along some of the seams, I think it was due to the cold winter (-35c) that we had.
>I've installed hardwood in my living room. There are some uneven transitions from board to board. How can I fix this?
>My floors are not even due to settling of the houseover the past 50 years, is it a problem refinishing them or would it beOK?
>How do we fix our buckled floorboards?
>How to fill space (removed) wall left?
>How do you replace/or blend a single piece of flooring?
>My maple floor gets a hump in it every humid summer, what do I do?
>How do I eliminate the air bubbles under our new laminate floor?
>How do we fix the sloping floor joists on the second floor of our log home?
>We have an area approximately 15" x 20" that is not level. Is there any wood floor product (epoxy, urethane) that could actually be poured into this "valley" in our floor and would dry level with the clear finish that the floor already has?
>There is an area around a vent where the floor seems to have bowed and squeaks when you walk over it. Would nailing the area around the vent solve the problem?
>Our hardwood that has buckled due to settling of 100 year old home. No boards havebroken; only some have gouges or splitting. Should I sand and refinish?
>Could we level our own floors?
>Is it possible to sand particle board where it is buckled with a belt sander?
>We have light areas on our floors where we once had rugs, how do we blend them in?
>How do we fix the yellow spots where the carpet covered the hardwood?
>I recently had someone come to my condo to replace a section of my laminate flooring. The new flooring ended up being about two or three shades lighter than the old. Is there any way to darken it without replacing it?
>What can I do about the uneven color, lighter and darker shades, on my floor?
>Since our maple floors were installed, we have noticed that there are patches where the colour of the flooring is much lighter than other areas. Is it oxidation?
Spills, Residues and Stains
>Some snow or water got into the pipes and dripped creosote onto our wood floor!
>After removing an old carpet I discovered paint had been dropped on the hardwood floor in several places. How do I remove it?
>Is there is any way I can remove the paint off door trim without removing the stain also?
>How do we repair water damage?
>Why do we have white spots on our floors?
>Should I use wood bleach to get rid of these deep stains?
>How do we remove the stain from the plaster that dripped onto our stair treads?
>How do we remove this glue residue from our floor?
>We have a water stain. The previous owner left some oak sawdust for hardwood floor repairs. How do we use it?
>How do we remove dog pee stains from stair treads?
>I have a dark spot on my hardwood floor which came as the result of my dog urinating on the floor. How do I remove it?
>we removed carpeting to find that pet stains have penetrated our beautiful hardwood floors - some areas are very dark, other areas appear almost "bleached" out. Do you have any suggestions on removing or lessening the stains?
>How do I remove or hide brown circles?
>What kind of bleaching can be used to remove dark pet urine stains?
>The hardwood floors in the upstairs portion of the house that we bought has been speckled with paint. How can we remove it?
>There are some black spots on our hardwood floor. How can we get them it out?
>What do we do about the white spots left from the white stain we sanded off?
>Only the first coat of paint on our pine floor is removable with chemical stripper. It is possible that an epoxy paint was used underneath. What can be used to remove epoxy paint from wood?
>What can be done to remove this glue/carpet/mess residue? Any chemicals capable of not damaging the poly finish of the old hardwood and at the same time remove the glue?
>How do I get carpet underpad off our wood floor?
>My old farm house has painted wide plank pine floors. What would you recommend to remove the many layers of paint?
>Do strippers need to be neutralized with mineral spirit?
>Should we apply polyurethane over peeling paint?